500ml Spray - Satin Finish GREEN RAL 6010

ZG-90 zinc phosphate enhanced paints which prime and top-coat in one application. Provides a superior combination of good drying time, great coverage and solid opacity.

Demonstrates superior corrosion protection (meets ISO 12944-2, cat. C3, tested to ASTM B117) and adhesion (tested to ISO 2409:0). The paints are RAL matched for accurate and consistent colour reproduction with a longlasting satin finish.

Application:

General fabrication: Use on bare, degreased metal to provide an effective, colour-matched finish with good long-term protection.

Facility Maintenance: use for repairing and maintaining fences, metal sheets, air conditioning units and ducting.

Complementary products: TF-90 for surface degreasing, MZ-90 for enhanced anticorrosion performance. (Cathodic protection) TF-90 / Partcode 1848 MZ-90 / Parcode 1972

Key Features

• 2-in-1: Primer and Topcoat
• Effective protection against corrosion
• Excellent adhesion and flexibility for longterm performance (ISO 2409:0)
• Crossrail approval #CRL-MCR-004850
• Tested to ASTM B117 and DIN EN ISO12944-2
• RAL referenced colour matches available: Black, Red, Blue, Green, White, and Yellow
• Also available as ZG-90 Silver - see separate data Specifications Tab - Partcode 1785 and 2018

Application

General fabrication: Use on bare, degreased metal to provide an effective, colour-matched finish with good long-term protection.

Facility Maintenance: use for repairing and maintaining fences, metal sheets, air conditioning units and ducting.

Complementary products: TF-90 for surface degreasing, MZ-90 for enhanced anticorrosion performance. (Cathodic protection) TF-90 / Partcode 1848 MZ-90 / Parcode 1972

Directions for use

• Use in well ventilated area.
• Remove any rust and scale with a wire brush. Ensure that the surface to be coated is clean, dry and free from grease.
• ZG-90 contains solids which settle during storage. Aerosol: shake the can vigorously until the agitator ball is free and continue shaking for a further minute. Tin: Carefully stir the paint until solvent and solids are thoroughly mixed.
• Shake/stir periodically during application.
• Apply in light, even coats - best results are obtained with 2 - 3 light coats rather than one heavy coat.
• Additional coats can be applied after 15 - 20 minutes.
• When finished: clear the aerosol valve by briefly spraying the can upside down. When using the tin, firmly reseal it. Clean brushes with White Spirit.
• Do not use on the inside of water storage tanks.
• Remove prior to welding.

Technical Data:

Storage and Shelf Life

The aerosol product may be stored at normal ambient temperatures and has a shelf life of not less than 48 months with correct storage. Aerosols should always be stored below 50 C, away from direct heat and naked flame.

The tin/bulk version may be stored at normal ambient temperatures and has a shelf life of not less than 48 months with correct storage. It should always be stored below 50 C, away from direct heat and naked flame.